IJASEM BIMONTHLY ONLINE JOURNAL Impact Factor: 4.45 DOI: 27.12.2017-1514390330

WELCOME TO IJASEM (ISSN: 2454-9940) Impact Factor: 4.45


The vision of IJASEM is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning teaching and research in the fields of Science, Engineering and Technology and Management. Original research work, theoretical work, application-based studies, which contribute to a better understanding of the relevant disciplines, are encouraged.


The mission of IJASEM is to provide the worldwide community with a platform for the latest research and advancements in different disciplines of Science  Engineering and Management. IJASEM focuses on interdisciplinary techniques and state-of-the-art research among various disciplines and to serve diverse global communities by advancing, disseminating and applying engineering knowledge for improving the quality of life and communicating the excitement of engineering.

Call for Papers

IJASEM welcomes the authors to submit their journals in aims to exchange and spread the latest researches, innovations and extended applications via online and printed monthly publications. All the submitted journals are reviewed by full double-blind international refereeing process.

IJASEM publication includes theoretical, practical and empirical paper in all areas of engineering and sciences. However, IJASEM enlists the below areas from Computer Science, Chemistry, Physics, Biology, Medical Science, Geology, Statistics, Accounting, Social Science, Mathematics, Management and Economics without putting any cap on the uncovered ones.

Last Date for Online Submission: 30th NOVEMBER 2018
Online Journal Publication (NOVEMBER Edition) starts: 30th SEPTEMBER 2018

Following is a long list of areas covered which is in fact much wider in scope than what you see. So, find out the details of the
 latest call for paper and start the online  submission process (the areas are not limited to the following):

Call for Reviewers

IJASEM welcomes proficient academicians to join us as Reviewers. Being a reviewer is a matter of prestige and personnel achievement. IJASEM follows a strict set of guidelines while accepting the applicant as a reviewer. The minimum sets of qualifications for being a reviewer of IJASEM are listed below:
  1. Should be a PhD degree holder from a recognized university.
  2. Should have a minimum of 15 years of experience who doesn’t have a PhD degree.
  3. Should be an author with a minimum of 8 publications in reputed journals.
  4. Should be an IJASEM author with at least a single IJASEM publication.
Applications for Reviewer ship can be sent to editor@ijasem.org. or info@ijasem.org

Research Paper Publishing Policy

Author Guidelines - IJASEM
Authors should submit only papers that have been carefully proofread and polished. Before submission please make sure that your paper is prepared using the IJASEM paper template. This will ensure fast processing and publication. Acceptance or rejection notification will be sent to all authors. 
 The IJASEM invites contribution in the following categories:       
1. Original research 
2. Survey/Review articles, providing a comprehensive review of a scientific topic.
3. Fast Communications: Short, self-contained articles on ongoing research.
4. Technical Notes
We accept an extended version of papers previously published in conferences and/or journals.
Submitted papers MUST be written in English, not exceeding 10 Single-column pages IJASEM format.
An addition of 5 pages is allowed.

Recent News

Call For Papers

Volume 4 Issue 3 November 2018
Paper Submission: 2018-11-15
Author Notification: Within two weeks
Journal Publication: 2018-11-28

Online Submission - IJASEM

Todays Visitor's

  : 108767
  United States: 1108
  India: 1076
  Oman: 907
  China: 634
  France: 354
  Netherlands: 329
  Germany: 237
  Romania: 198
  Russian Federation: 151
  Canada: 137
  Turkey: 134
  Egypt: 122
  Switzerland: 61
  Sweden: 59
  Ukraine: 58
  United Kingdom: 50
  Pakistan: 47
  Asia/Pacific Region: 42
  Iran, Islamic Republic of: 40
  Panama: 32
  Morocco: 29
  Europe: 26
  Norway: 24
  Italy: 24
  Moldova, Republic of: 24
  Hungary: 23
  Ireland: 20
  Bulgaria: 19
  Albania: 16
  Japan: 14
  Brazil: 12
  Latvia: 12
  Slovakia: 12
  Thailand: 11
  Austria: 11
  Denmark: 11
  Seychelles: 10
  Algeria: 10
  Poland: 10
  Sudan: 9
  Nigeria: 8
  Czech Republic: 8
  Malaysia: 8
  Iraq: 7
  Taiwan: 5
  Bangladesh: 4
  Lithuania: 4
  Finland: 4
  Spain: 3
  Iceland: 3
  Bosnia and Herzegovina: 2
  Singapore: 2
  South Africa: 2
  Hong Kong: 2
  Uganda: 1
  Brunei Darussalam: 1
  Israel: 1
  Indonesia: 1
  Saudi Arabia: 1
  Philippines: 1
  Australia: 1
  Luxembourg: 1
  Belgium: 1
  Korea, Republic of: 1
  Mexico: 1
  Kazakhstan: 1
  Libya: 1

How To Publish Paper

This article will help you to write and publish your research paper. For Research Scholars doing Phd it is mandatory to publish their research papers at international level journals. And Many of the students who will apply for further studies in technical courses will discover that relevant published research papers help during admission process. So here we are trying to post some guidelines that you can follow...   1. Preliminary The first activity for publishing a technical paper is to figure out your technical area of interest. Make sure the you had carried out enough studies on basics of that topic. Then you have you to update yourself with the ongoing technical happenings in your chosen field. You can do this by 1) Reading and googling a lot of technical papers. There are a lot of journals and IEEE papers floating around in net. 2) Go to one or more conferences, listen carefully to the best talks, and find out what people are thinking about.   Once you are done with the above mentioned steps, then you are eligible for writing a paper   2. Read existing Papers Read everything that might be relevant gives you different perspective of the focus topic. But be selective too, for not getting to much deviated from you topic of interest. Getting used to simulation software is much useful for simulating your work. You can find a lot of time during the days and utilize those holidays & free days.   3. A jump start When you first start reading up on a new field, ask your fellow researcher what the most useful journals and conference proceedings are in your field, and ask for a list of important papers that you should read. This activity will give you a jump start   4. Crack the jargons and terms One of among the tough nuts to crack is to understand the paper published by others. The easiest way is to is by reading it many times. The more times you read the more will be revealed to you. Keep the Internet handy so that you can crack the jargons and terms, which you may find strange.   5. Write down your studies Write down speculations, interesting problems, possible solutions, random ideas, references to look up, notes on papers you've read, outlines of papers to write, and interesting quotes. Read back through it periodically. Keeping a journal of your research activities and ideas is very useful.   6. Bits and pieces together Now you can identify important open problems in your research field and also you will be very much aware of what you are doing and what you have to do. The more you go, you'll notice that the bits of random thoughts start to come together and form a pattern, which may be a bright enough for a good paper.   7. Simulation softwares easies Please don't pick overly ambitious topics; instead identify a realistic size problem. Gather the Matlab files available in the Internet that is related to your topic and simulate it for the claimed results. Please don't expect the Mfiles readily available for a solution published in a paper. But you can make it of your own by modifying and adding. Believe me, Matlab is a very easy tool! Once you are able to get the simulated outputs of your solution, you can carry on for making a paper out of it.   8. Essence of your work The essence of your work can be diagnosed by analyzing below listed points. We can increase the maturity of the paper by improving these. Significance: Why was this work done? Did you solve an important problem of current interest or is it an obscure or obsolete problem? Originality/Novelty: Is your approach novel or is it tried-and-true? Did you need to develop new tools, either analytical or physical? Completeness: Have you tested a wide range of scenarios, or is this just a simple proof-of-concept? Correct: Is your solution technically sound or are there errors? [3] Consider improving the same.   9. Anatomy of Paper Generally a paper has seven sections and a maximum of four pages. They are 1. Abstract, 2. Introduction, 3. Existing techniques, 4. Your contribution, 5. Results and 6. Conclusion.   10. The procedure As a part of your paper publication, you can start documenting the 'existing techniques' from the scrap journal you did during the studies. Here you have to extract what all are the techniques existing as a solution for the particular problem and the pros and cons of those. Next, document the 'introduction' about what is the topic and what you are going to do. Better to keep it short. Follows your contribution and the simulated results. 1. Describe the problem 2. State your contributions'Abstract' is one section you can work on in the last, as it has to cover the all the sections very briefly. Please note that Abstract makes the committee members to decide whether or not to read your paper. Generally four lines are sufficient for this. 1. State the problem 2. Say why it's an interesting problem 3. Say what your solution achieves 4. Say what follows from your solution   11. Section by section The divide-and-conquer strategy works on a day-to-day level as well. Instead of writing an entire paper, focus on the goal of writing a section, or outline. Remember, every task you complete gets you closer to finishing your paper.   12. Get a pre-review Now your paper is ready. You can ask your peers or professors to review your paper. Next is to find the right place to publish it. You can start of with national level conferences, which often gets conducted in many universities. Then once you gain a level of confidence, you can proceed to international conferences and journals.   13. Read the reviews carefully This is really, really, really hard. Only a small proportion, 5 to 10 percent, are accepted the first time they are submitted, and usually they are only accepted subject to revision. In fact, anything aside from simply "reject," Neal-Barnett reminds, is a positive review. These include: * Accept: "Which almost nobody gets," she says. * Accept with revision: "Just make some minor changes." * Revise and resubmit: "They're still interested in you!" * Reject and resubmit: Though not as good as revise and resubmit, "they still want the paper!"[2] Read every criticism as a positive suggestion for something you could explain more clearly   14. Don't panic After reading the review the first time, put it aside. Come back to it later, reading the paper closely to decide whether the criticisms were valid and how you can address them. You will often find that reviewers make criticisms that are off-target because they misinterpreted some aspect of your paper. If so, don't let it get to you -- just rewrite that part of your paper more clearly so that the same misunderstanding won't happen again. It's frustrating to have a paper rejected because of a misunderstanding, but at least it's something you can fix. On the other hand, criticisms of the content of the paper may require more substantial revisions -- rethinking your ideas, running more tests, or redoing an analysis.   15. Rejected? Be Positive If your paper is rejected, keep trying! Take the reviews to heart and try to rewrite the paper, addressing the reviewer's comments. "Remember, to get a lot of publications, you also will need to get lots of rejections," says Edward Diener, PhD, editor of APA's Journal of Personality and Social Psychology: Personality Processes and Individual Differences.   16. Common mistakes Wrong sequence in Figure and Table numbering Misalignment of columns Usage of figures from another paper without credit and permission   17. Where to publish Generally, there are three main choices: * National Conference: A conference is the right place for beginner scholars, since the level of scrutiny is minimal. The conferences will accept papers which details about the comparison of existing technologies, mathematically proven but practically unproven proposals, etc. * International Conference: A conference is the good play ground for Intermediate scholars. This mostly same as National Conference but the sensitization will be more. Conferences offer rapid time-to-publish, plus you will often get feedback on your work when you present it. Page lengths and acceptance standards vary widely from conference to conference, but generally conference papers are shorter than full journal papers. [3] * Journal: Journal papers are generally the Alfa and Omega of publishing papers and they are considered as more prestigious than conferences.

Read More


We welcome original or extended version of previously published papers in conferences and/or journals. All areas of engineering and science like Computer Science, Chemistry, Physics, Biology, Medical Science, Geology, Statistics, Accounting, Social Science, Mathematics, Management and Economics are covered (the areas are not limited to the following):   Active and Programmable NetworksActive safety systemsAd Hoc & Sensor NetworkAd hoc networks for pervasive communicationsAdaptive, autonomic and context-aware computingAdvance Computing technology and their applicationAdvanced Computing Architectures and New Programming ModelsAdvanced control and measurementAgent-based middlewareAlert applicationsapplication specific IC'sautomotive, marine and aero-space control and all other control applicationsAutonomic and self-managing middlewareAutonomous vehicleB2B and B2C managementBioInformaticsBio-MedicineBiotechnologyBroadband and intelligent networksBroadband wireless technologiesCAD/CAM/CAT/CIMCall admission and flow/congestion controlCapacity planning and dimensioningChanging Access to Patient InformationChannel capacity modelling and analysisCloud Computing and ApplicationsCollaborative applicationsCommunication applicationCommunication architectures for pervasive computingCommunication systemsComputational intelligencecomputer and microprocessor-based controlComputer Architecture and Embedded SystemsComputer BusinessComputer VisionComputer-based information systems in health careComputing EthicsComputing Practices & ApplicationsCongestion and/or Flow ControlContent DistributionContext-awareness and middlewareCreativity in Internet management and retailingCross-layer design and Physical layer based issueCryptographyData Base ManagementData fusionData MiningData retrievalData Storage ManagementDecision analysis methodsDecision makingDigital Economy and Digital DivideDigital signal processing theoryDistributed Sensor NetworksDrives automationDSP implementationEconomics TheoryE-BusinessE-CommerceE-GovernmentElectronic transceiver device for Retail Marketing IndustriesEmbeded Computer SystemEmerging advances in business and its applicationsEmerging signal processing areasEnabling technologies for pervasive systems (e.g., wireless BAN, PAN)EncryptionEnergy-efficient and green pervasive computingEstimation and identification techniquesEvaluation techniques for middleware solutionsEvent-based, publish/subscribe, and message-oriented middlewareEvolutionary computing and intelligent systemsExpert approachesFacilities planning and managementFlexible manufacturing systemsFormal methods and tools for designingFuzzy algorithmsFuzzy logicsGPS and location-based applicationsGreen ComputingGrid NetworkingHealthcare Management Information TechnologyHigh-speed Network ArchitecturesHuman Computer Interaction (HCI)Human-machine interfacesHybrid SensorICT ConvergenceImage analysis and processingImage and multidimensional signal processingImage and Multimedia applicationsIndustrial applications of neural networksIndustrial automated processIndustrial communicationsInformation and data securityInformation indexing and retrievalInformation ManagementInformation processingInformation SystemInformation systems and applicationsInformation Technology and their applicationInfrastructure monitoring and control applicationsInnovation and product developmentInnovation Technology and ManagementInnovative pervasive computing applicationsInstrumentation electronicsIntelligent Control SystemIntelligent sensors and actuatorsInternet applications and performancesInternet Services and Applications Internet Technologies, Infrastructure, Services and ApplicationsInterworking architecture and interoperabilityKnowledge based systemsKnowledge managementLocation and provisioning and mobility managementLocation Based ServicesLogistics applicationsManagement TheoryManagement information systemsMedical imagingMEMS and system integrationMicro/nano technologyMicrosensors and microactuatorsMiddleware IssuesMiddleware services and agent technologiesMiddleware solutions for reliability, fault tolerance, and quality-of-serviceMobile and Wireless NetworksMobile applicationsMobile networks and servicesMobile/Wireless computing systems and services in pervasive computingMultimedia CommunicationsMultimodal sensing and context for pervasive applicationsMultisensor fusionNavigation and GuidanceNavigation SystemsNetwork Control and ManagementNetwork management and servicesNetwork MeasurementNetwork Modeling and SimulationNetwork PerformanceNetwork ProtocolsNetwork SensorNetwork-based automationNetworked vehicles applicationsNetworking theory and technologiesNeural NetworksNeuro-FuzzyNeuro-Fuzzy applicationNonlinear and adaptive controlNursing information managementOn-board diagnosticsOpen Models and ArchitecturesOpen Source ToolsOperations researchOptical NetworksOptimal and robot controlPattern RecognitionPeer to Peer and Overlay NetworksPerception and semantic interpretationPervasive ComputingPerformance optimizationPervasive opportunistic communications and applicationsPervasive sensingPositioning and tracking technologiesPower plant automationProgramming paradigms for pervasive systemsQuality of Service and Quality of ExperienceQuality of service and scheduling methodsReal-time computer controlReal-time information systemsReal-time multimedia signal processingReconfigurable, adaptable, and reflective middleware approachesRelay assisted and cooperative communicationsRemote health monitoringRemote SensingResource allocation and interference managementRFID and sensor network applicationsScalability of middlewareSecurity and risk managementSecurity middlewareSecurity, Privacy and TrustSecurity Systems and TechnolgiesSensor array and multi-channel processingSensor fusionSensors and RFID in pervasive systemsService oriented middlewareSignal Control SystemSignal processingSignal processing in educationSmart devices and intelligent environmentsSmart home applicationsSocial and economic models for pervasive systemsSocial Networks and Online CommunitiesSoftware EngineeringSoftware engineering techniques for middlewareSoftware evolution and maintenance in pervasive systemsSpeech interfaceSpeech processingStandards and interfaces for pervasive computing environmentsSupply Chain ManagementSystem security and security technologiesTechnology in EducationTheoretical Computer ScienceTransportation informationTrust, security and privacy issues in pervasive systemsUbiquitous and pervasive applicationsUbiquitous NetworksUser interfaces and interaction modelsVehicle application of affective computingVerifying and evaluating middlewareVirtual immersive communicationsVirtual realityVision-based applicationsVisualization and Virtual Reality as Applied to Computational ScienceWired/Wireless SensorWireless technology

Read More

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.